Filter By:
- 26-Inch (2)
- 650B (8)
- 29-Inch (16)
- 700c, 27-Inch & 650c (32)
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Wheels
$2,750.00
How do you make super better? Make it tubeless. Zipp’s go-to triathlon and time trial weapon, the Super-9 Tubeless Disc disc-brake wheel is tubeless ready with a 18mm internal width. That means you can lower tire pressure for a host of benefits: better cornering grip, better compliance, and reduced rolling resistance. With tubeless, you get all this without the risk of pinch flats. So, go attack the course. The Super-9 gives you the technology needed to do your best. The Super-9 Carbon Clincher optimizes supreme aerodynamics, power transfer, stiffness, lightweight and durability. Add to that the modulation and stopping power of disc brakes, you’re ready to set that PR.
- Zipp graphics and cosmetic identity that screams speed applied with our ImPress direct-print technology
- 18mm internal width and tubeless compatibility for optimization of wider tires with lower tire pressure, lower rolling resistance, and increase grip and compliance
- Greater stopping power and modulation of disc brakes
- Aero, durable, light weight
- Center locking rotor interface. Lockring is included
- XDR or SRAM/Shimano driver bodies
- Campagnolo driver body sold separately
$89.99
- Rims: WTB ST i23 (Black), inner width: 23 mm
- New TCS 2.0 Tubeless system
- Solid Strip (included) protects and ensures a smooth surface between the tire and the rim
- Easy On-Ramp profile allows for a smooth tire installation and stress-free inflation
- Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency
- Drilled for Presta valve
- 32 holes
- Front hub: Formula DC20 (Black), Laser etched logo, M9x100mm
- HG Freehub compatible with 8—10, MTB 11-speed
- 6-bolt disc mount
- Adjustable bearings
- Quick-Release binder included
- Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)
- Tubeless Compatible (Valve and Tape not included)
$109.99
- Rims: WTB ST i23 (Black), inner width: 23 mm
- New TCS 2.0 Tubeless system
- Solid Strip (included) protects and ensures a smooth surface between the tire and the rim
- Easy On-Ramp profile allows for a smooth tire installation and stress-free inflation
- Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency
- Drilled for Presta valve
- 32 holes
- Rear hub: Formula DC22 (Black), Laser etched logo, M10x135mm
- HG Freehub compatible with 8—10, MTB 11-speed
- 6-bolt disc mount
- Adjustable bearings
- Quick-Release binder included
- Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)
- Tubeless Compatible (Valve and Tape not included)
$150.00
Rims: Mavic XM119 Disc 29" (Black)
- ETRTO 662-19
- External width: 24mm
- Inner width: 19mm
- Profile height: 20.5mm
- Disc Brake Only
- For Schrader or Presta valve (Adapter included)
- 32 holes
Rear hub: Shimano FH-M525 (Black)
- 10x135mm
- 6-Bolt Disc Mount
- Adjustable Cup & Cone
- Contact sealed hub and freehub body
- Quick Release Binder included
- Compatible with 8,9,10 speed (MTB 11 speed requires 1.85mm spacer, not included)
- Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)
$440.00
Born on the World Cup, destined for your local trails. We poured World Championship-winning engineering into developing an all-new alloy for these Control wheels. To increase the new material's durability, we customized our shot peening process—where metal projectiles are shot at the alloy to increase its strength—meeting the precise demands of our XC riders. If that wasn't enough, to eliminate creaking and reduce weight, individually customized sleeves are chosen to bond every single rim. The result is a wildly over-engineered, trail-ripping, best-of-the-best, aluminum wheel; held to the same standards as our highest-end Control SL carbon components.
Whether you are looking for a solid set of training wheels that will handle it all or a big upgrade from entry-level wheels, Roval Control Alloy is the go-to wheel. With creak-free hoop construction that's laced to high-performance and proven DT Swiss hubs, you can tap into a wheelset born from World Cup technology that's ready for all riders.
- Rim: Control Alloy Asymmetric, 6013 Alloy Shot-Pened, 29", Disc Brake, Zero Bead Hook Design, Tubeless Compatible, Compatible with Tire Inserts
- Rim Details: 19mm Depth, 31mm External Width, 27mm Internal Width
- Hub: DT Swiss 350 Straight-pull 6-bolt, Star Ratchet 36t internals (10 degs), 110x15mm & 148x12mm, Sram XD Freehub (Convertible freehub )
- Bearing Type: DT Swiss Sealed Steel Cartridge Bearings
- Spokes: Sapim D-Light Straightpull, Front: Two-cross (1:1) 28 count, R: 304mm, L: 304mm - Rear: Two-cross (1:1) 28 count, DS: 304mm NDS: 304mm
- Nipple: Sapim Secure Lock Double Square Alloy Blk, 2.0 x 18mm, 16cNm
- Tire Size: 1.9" - 2.6" - Max Pressure: 1.9"-2.3": 40psi, 2.35"-2.5": 35psi, 2.51" -2.6": 30psi
- Weight: Wheelset 1,648g, Front 768g, Rear 880g (excluding 15g, tubeless rim tape, and tubeless valve)
- Assembly Method: Hand-built
- Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit, 19 and 31mm OD Endcaps, Lifetime Warranty System Weight Limit: 275lbs / 125kg
$360.00
Born on the World Cup, destined for your local trails. We poured World Championship-winning engineering into developing an all-new alloy for these Control wheels. To increase the new material's durability, we customized our shot peening process-where metal projectiles are shot at the alloy to increase its strength-meeting the precise demands of our XC riders. If that wasn't enough, to eliminate creaking and reduce weight, individually customized sleeves are chosen to bond every single rim. The result is a wildly over-engineered, trail-ripping, best-of-the-best, aluminum wheel: held to the same standards as our highest-end Control SL carbon components.
Whether you are looking for a solid set of training wheels that will handle it all, or a big upgrade from entry level wheels, Roval Control Alloy is the go-to wheel. With creak-free hoop construction that's laced to high-performance and proven DT Swiss hubs, you can tap into a wheelset born from World Cup technology that's ready for all riders.
- Rim: Control Alloy Asymmetric, 6013 Alloy Shot-Pened, 29", Disc Brake, Zero Bead Hook Design, Tubeless Compatible, Compatible with Tire Inserts
- Rim Details: 19mm Depth, 31mm External Width, 27mm Internal Width
- Hub: DT Swiss 350 Straight-pull 6-bolt, Star Ratchet 36t internals (10 degs) , 110x15mm & 148x12mm, Sram XD Freehub (Convertible freehub )
- Bearing Type: DT Swiss Sealed Steel Cartridge Bearings
- Spokes: Sapim D-Light Straightpull, Front: Two-cross (1:1) 28 count, R: 304mm, L: 304mm—Rear: Two-cross (1:1) 28 count, DS: 304mm NDS: 304mm
- Nipple: Sapim Secure Lock Double Square Alloy Blk, 2.0,18mm, 16cNm
- Tire Size: 1.9"—2.6"—Max Pressure: 1.9"-2.3": 40psi, 2.35"-2.5": 35psi, 2.51" -2.6": 30psi
- Weight: Wheelset 1,648g, Front 768g, Rear 880g (excluding 15g, tubeless rim tape and tubeless valve)
- Assembly Method: Hand-built
- Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit, 19 and 31mm OD Endcaps, Lifetime Warranty System Weight Limit: 275lbs / 125kg
$670.00
The trails in our neck of the woods get pretty hairy pretty fast, so we've found them to be the perfect testing ground for tough, nimble wheels like our Traverse 27.5 Carbon. The steep climbs and descents helped inspire some pretty radical designs, and most importantly, left us with no doubt that these wheels will exceed your expectations.
Let's talk about those expectations. They include everything from the ability to stay true after launching off drops to being light enough to efficiently pedal to the top of a climb—and they all begin with the rim. Our engineers knew they wanted carbon fiber, and with the inclusion of our Zero Bead Hook design, they were able to implement a continuous fiber layup across the sidewall and rim bed. And when paired with a whopping 30-millimeter internal rim width, they made a wheel that's super resilient to impact with low rolling resistance and incredible traction. You'll also find that it helps prevent "burping" during hard cornering, while making tubeless set up quick and easy.
Along with light overall weight, stiffness, and durability, another top priority for the Traverse was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design with a wider profile and higher flange to aid in overall stiffness.
A wider rim does a variety of things for ride performance—it better supports the tire for increased confidence and grip, and it affords you the ability to run lower pressures that help spread impact out over a larger surface area to reduce the risk of damage. And when you combine this girth with the notoriously nimble and playful 27.5 platform, you’re left with an incredibly stiff, quick-to-accelerate wheelset that climbs just as well as it shreds descents.
After designing the perfect trail rim, we kept our lightweight and durable design properties in mind with the wheel build, hand-lacing the rims DT Swiss 350 Classic hubs via 28 DT Swiss Competition Race spokes and brass Pro Lock nipples. Inside, you'll find sealed cartridge bearings and a 36t quick engagement ratchet system for quick accelerations. We also wanted to ensure that each wheel was built correctly, and we found that this could only be achieved by hand. Machines, we found, have a tendency to miss little mistakes that humans catch.
Each wheelset comes packaged with a SRAM XD driver, 11-speed freehub, and a tubeless valve stem in order to make tubeless set-up a touch easier. *Please note that Shimano freehubs are sold separately.
- Rim Type: Traverse Carbon, 27.5, Disc Brake, Tubeless Ready, Zero Bead Hook design
- Rim Details: 30mm Internal Width
- Hub: DT Swiss 350 J-bend, 6-bolt, 36T (10deg) Star Ratchet, XD Freehub, 110x15mm & 148x12mm thru-axle compatible, (Convertible freehub and endcaps)
- Bearing Type: DT Swiss Sealed Steel Cartridge
- Nipple: DT Swiss Brass Pro Lock hexagonal
- Weight: Wheelset 1700g
- Assembly Method: Hand built at every step.
$530.00
The trails in our neck of the woods get pretty hairy pretty fast, so we've found them to be the perfect testing ground for fast and tough wheels like our Traverse 29 Carbon. The steep climbs and descents helped inspire some pretty radical designs, and most importantly, left us with no doubt that these wheels will exceed your expectations.
Let's talk about those expectations. They include everything from the ability to stay true after launching off drops to being light enough to efficiently pedal to the top of a climb, and they all begin with the rim. Our engineers knew they wanted carbon fiber, and with the inclusion of our Zero Bead Hook design, they were able to implement a continuous fiber layup across the sidewall and rim bed. And when paired with a whopping 30-millimeter internal rim width, they made a wheel that's super resilient to impact with low rolling resistance and incredible traction. You'll also find that it helps prevent "burping" during hard cornering, while also making tubeless set up quick and easy.
Along with light overall weight, stiffness, and durability, another top priority for the Traverse was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for front and rear wheels, that are all the same length, making it easy to find replacements if needed. And finally, we engineered a new hub design with a wider profile and higher flange to aid in overall stiffness.
A wider rim does a variety of things for ride performance, better supports the tire for increased confidence and grip, and it affords you the ability to run lower pressures that help spread impact out over a larger surface area to reduce the risk of damage. And when you combine this girth with the notoriously fast rolling 29 platform, you're left with an incredibly stiff, quick to accelerate wheelset that climbs just as well as it shreds descents. After designing the perfect trail rim, we kept our lightweight and durable design properties in mind with the wheel build, hand-lacing the rims with DT Swiss 350 Classic hubs via 28 DT Swiss Competition Race spokes and brass Pro Lock nipples. Inside, you'll find sealed cartridge bearings and a 36t quick engagement ratchet system for quick accelerations. We also wanted to ensure that each wheel was built correctly, and we found that this could only be achieved by hand. Machines, we found, have a tendency to miss little mistakes that humans catch.
Each wheelset comes packaged with a SRAM XD driver, 11-speed freehub, and a tubeless valve stem in order to make tubeless set up a touch easier.
*Please note that Shimano freehubs are sold separately.
- Assembly Method: Hand built at every step; from rim layup to the last nipple turn.
- Bearing Type: DT Swiss Sealed Steel Cartridge Bearings
- Extras: 19 and 31mm OD end cap options included, Roval tubeless tape and tubeless valve, Spare Spoke and Nipple Kit, System Weight Limit: 240lbs / 109kg
- Hub: Roval DT Swiss 350 J-bend, 6-bolt, Star Ratchet 36t internals (10 deg), 110x15mm & 142x12mm thru-axle, SRAM XD Freebub, (Convertible freehub and endcaps)
- Nipple: DT Swiss Hex Prolock Brass 2.0x14mm
- Rim Details: 25mm Depth, 35mm External Width, 30mm Internal Width, ERD 594
- Rim Type: Traverse Carbon, 29, Disc Brake, Tubeless Ready, Zero Bead Hook Design
- Spokes: DT Swiss Competition Race J-Bend, Front: Two-Cross 28 count, R: 282mm, L: 279mm, Rear: 282 Two-cross 28 count, DS: 280mm, NDS: 281mm
- Tire Size: 1.95 - 3.0
- Max Pressure: 40 psi
- Weight: Wheelset 1,800g (including tubeless rim tape and tubeless valve)
$1,600.00
Trail wheels often fall into two categories—they’re either heavy and durable or light and flexy. And because of this, a lightweight, wide-profile, and enduro-ready carbon wheel seems like something only found in a fairytale, but lucky for you, we made it a reality. The Traverse SL Fattie 27.5 puts all the flick'able, nimble features you need in an all-mountain wheel into one package, and it has the results to prove it.
Along with light overall weight, stiffness, and durability, another top priority for the Traverse SL was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for both the front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness.
What's with the big-boned name, you ask? The Traverse SL Fatties may be wide, but with a 30mm inner rim width, they’re far from the girth of a fat bike rim. But let's talk width. You've probably noticed that mountain bike rim widths have hovered between 19 and 23 millimeters for decades, and they've been long overdue for a change. In the search for a better wheel design, our engineers began testing 2.3- to 2.5-inch tires on 45-millimeter-wide fat bike rims to see what, if any, benefits could be found. It only took them a few rides to realize that the wider rims offered a variety of advantages, like adding additional tire volume, which better supports the tires in hard cornering, greatly improves traction because of the ability to run lower pressures, and noticeably increases rim stiffness. They did note that there is an occurrence of diminishing returns with increasing width, however, and after testing everything from 25 to 45mm, determined that a 30mm inner width is optimal.
After determining the width, we began designing the rim using the knowledge that we gained when developing the Control SL. With this, we started with our Zero Bead Hook technology that gets rid of the weak spot found in a traditional wheel, and combined it with the wider profile to make a carbon rim that effectively dissipates forces. This way, you can take abuse from rocks without the worry of cracks or dents. Ok, so they’re strong, impact-resistant, and tire supporting—they must be heavy, right? Wrong. Even though “fattie” is in their name, they're far from fat.
To achieve this weight, we hand-build our rims to our own alloy hubs, using only the highest quality DT Swiss Competition Race spokes. Inside our hubs, you'll find DT Swiss 240 internals with a quick engaging 54t DT Swiss star ratchet system in the rear that allows you to power over rocks and roots without delay. And while machines do a pretty good job of building wheels, we choose professionally trained humans because they do so with an artistic touch that makes for minimal flaws.
Whether you need a carbon wheelset to get you through an enduro stage or one to shred your local rock garden, the Traverse SL Fattie has you covered.
$1,599.00 - $2,199.00
EWS TESTED.
The EWS is strict—break certain parts and you DNF. The rule's meant to encourage sensible management of equipment, but it's also tipped the balance in favor of toughness and reliability. Enter the Reserve 30. Its 30mm internal width supports a 2.3-2.5" tire, and the thick rim beads stand up to the abuse of tough, rocky, steep tracks ridden at elite speed. While DH rims see greater single impacts, nothing beats the full weekend of regular abuse that an EWS race dishes out, to say nothing of the infamous 'Anti-Grip' and the rocks buried within the moondust in the Andes of Chile.
$710.00
Feel your bike come alive on the open road with the new Alpinist CL II, featuring the lightest, best-handling clincher rims we have ever made, elevated with the performance of a tubeless system. The brand new Alpinist CL II now brings mountain-taming performance slightly closer to earth with a carefully selected build designed to let riders take full advantage of the low rim and spoke mass. The Alpinist CL II utilizes the same rim as the alpinist clx ii. They react to even the slightest increase in power with immediate acceleration and carve the purest lines in the corners, yet they can also handle almost double the impact standards of every certifying body. The result is a 1375-gram tubeless wheelset with an otherworldly ride quality designed for real-world road pressures. The Alpinist CL II utilizes components curated to keep you rolling and rolling fast. The DT Swiss 350 hubs, featuring their star ratchet drive system, are reliable and easy to service, while 24 DT Swiss comprace straight-pull spokes front and rear, laced to the rims with their alloy pro lock nipples, are synonymous with reliability and can be obtained at any bike shop. The reduced rolling resistance of a tubeless setup is undeniable, as are the benefits of improved handling and incredible puncture protection. It took the most extensive and demanding engineering and testing program we've ever undertaken. As a result of this extensive development, the Alpinist CL II features a hooked rim that can handle a huge range of pressures up to 110psi and offers an easier set up and mounting experience than ever.
- Rim: Alpinist CLX Carbon Clincher, 700c, Disc Brake, Tubeless
- Rim Details: 33mm Depth, 27mm External Width, 21mm Internal Width
- Hub: DT Swiss 350 Straightpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub
- Bearing Type: DT Swiss Sealed Steel Cartridge Bearings
- Spokes: DT Swiss Competition Race Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 276mm, NDS: 290mm; Rear: Two-cross (1:1) 24 count, DS: 283mm NDS: 287mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm
- Tire Size: 24mm—38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi)
- Weight: Wheelset 1,375g, Front 606g, Rear 769g (including 15g, tubeless rim tape and tubeless valve)
- Assembly Method: Hand built at every step; from rim layup to the last nipple turn.
- Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg
$990.00
Feel your bike come alive on the open road with the new Alpinist CL II, featuring the lightest, best-handling clincher rims we have ever made, elevated with the performance of a tubeless system. The brand new Alpinist CL II now brings mountain-taming performance slightly closer to earth with a carefully selected build designed to let riders take full advantage of the low rim and spoke mass. The Alpinist CL II utilizes the same rim as the alpinist clx ii. They react to even the slightest increase in power with immediate acceleration and carve the purest lines in the corners, yet they can also handle almost double the impact standards of every certifying body. The result is a 1375-gram tubeless wheelset with an otherworldly ride quality designed for real-world road pressures. The Alpinist CL II utilizes components curated to keep you rolling and rolling fast. The DT Swiss 350 hubs, featuring their star ratchet drive system, are reliable and easy to service, while 24 DT Swiss comprace straight-pull spokes front and rear, laced to the rims with their alloy pro lock nipples, are synonymous with reliability and can be obtained at any bike shop. The reduced rolling resistance of a tubeless setup is undeniable, as are the benefits of improved handling and incredible puncture protection. It took the most extensive and demanding engineering and testing program we've ever undertaken. As a result of this extensive development, the Alpinist CL II features a hooked rim that can handle a huge range of pressures up to 110psi and offers an easier set up and mounting experience than ever.
- Rim: Alpinist CLX Carbon Clincher, 700c, Disc Brake, Tubeless
- Rim Details: 33mm Depth, 27mm External Width, 21mm Internal Width
- Hub: DT Swiss 350 Straightpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub
- Bearing Type: DT Swiss Sealed Steel Cartridge Bearings
- Spokes: DT Swiss Competition Race Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 276mm, NDS: 290mm; Rear: Two-cross (1:1) 24 count, DS: 283mm NDS: 287mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm
- Tire Size: 24mm—38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi)
- Weight: Wheelset 1,375g, Front 606g, Rear 769g (including 15g, tubeless rim tape and tubeless valve)
- Assembly Method: Hand built at every step; from rim layup to the last nipple turn.
- Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg
$1,600.00
Lighten Your Bike, Not Your Wallet.
Conquer mountains, flatten hills, and feel your bike come alive with this ultra-light, 1365 gram wheelset. Mass is the enemy of performance, and the Alpinist CL is the lightest wheelset in its class. Weight has been pared to the absolute minimum to make the make the most of every watt and deliver incredible responsiveness without sacrificing any of the strength, ride quality, or durability that are crucial to long-term performance and satisfaction.
- Assembly Method: Hand-built
- Braking Surface: Disc brake only
- DT Swiss 350, Center Lock, Sealed Cartridge bearings, DT Swiss Star Ratchet internals,142x12mm thru-axle compatible
- Extras: Roval padded wheelbag. NoFault crash replacement policy. Lifetime warranty
- Nipple Type: DT Swiss Pro Lock hexagonal
- Rim Depth: 33mm
- Rim Material: Carbon
- Rim Type: Carbon, clincher (tube-type)
- Rim Width: 21mm internal
- Spoke Count: 24F and 24R
- Spoke Pattern: Two-cross (1:1) Front and Rear
- Spoke Type: DT Swiss Aerolite T-head
- Weight: Front - 601g; Rear - 764g
$1,100.00
Conquer mountains, flatten hills, and feel your bike come alive with this ultra-light, 1365 gram wheelset. Mass is the enemy of performance, and the Alpinist CL is the lightest wheelset in its class. Weight has been pared to the absolute minimum to make the make the most of every watt and deliver incredible responsiveness without sacrificing any of the strength, ride quality, or durability that are crucial to long-term performance and satisfaction.
- Assembly Method: Hand-built
- Braking Surface: Disc brake only
- Extras: Roval padded wheelbag. NoFault crash replacement policy. Lifetime warranty
- Front Hub: Roval AeroFlange Disc, Center Lock, Sealed Cartridge bearings
- Nipple Type: DT Swiss Pro Lock hexagonal
- Rim Depth: 33mm
- Rim Material: Carbon
- Rim Type: Carbon, clincher (tube-type)
- Rim Width: 21mm internal
- Spoke Count: 21
- Spoke Pattern: Radial/Two-cross (2:1)
- Spoke Type: DT Swiss Aerolite T-head
- Weight: 562g
$1,075.00
Feel your bike come alive on the open road with the new Alpinist CLX II-the lightest, best-handling clincher wheels we have ever made. Hyper-responsive acceleration, magic in the corners, sublime over rough roads, all elevated with the performance of a tubeless system. There's no room for a single excess gram whether you're chasing summits or ride quality because perfection is only achieved when there is nothing left to take away. It takes more than a lightweight rim to deliver the incredible reactivity and handling of the tubeless Alpinist CLX II. The wheelset is designed as a system with our engineers controlling and testing every part of that system-hubs, rims, spokes, lacing-and developing it hand-in-hand with Specialized Tubeless tires. The result is a 1250-gram tubeless wheelset with otherworldly ride quality. The Alpinist CLX II utilizes a hooked rim (allowing for real-world riding pressures up to 110psi, if that's your thing) for secure tire bead retention and an easier set up and mounting experience than ever before. All in a wheel that almost doubles current industry impact standards while managing to achieve the lightest weight possible. Our all-new LightAF hubs are the spinning heart of the Alpinist CLX II. We carved 50 grams out of the previous Alpinist CLX hub with new low-profile hub bodies and machined rotor mounts. Inside, DT Swiss EXP internals and SINC ceramic bearings deliver silky-smooth efficiency and outstanding durability.
- Rim: Alpinist CLX Carbon Clincher, 700c, Disc Brake, Tubeless
- Rim Details: 33mm Depth, 27mm External Width, 21mm Internal Width
- Hub: Roval Light Hub (LFD13/LF14R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub
- Bearing Type: DT Swiss SINC Ceramic Bearings
- Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 21 count, DS: 276mm, NDS: 290mm; Rear: One-cross/Two-cross (2:1), DS: 288mm NDS: 286mm
- Nipple: DT Swiss Hex Prolock Al 2.0x14mm
- Tire Size: 24mm - 38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi)
- Weight: Wheelset 1,265g, Front 670g, Rear 694g (including 15g, tubeless rim tape and tubeless valve)
- Assembly Method: Hand built at every step; from rim layup to the last nipple turn.
- Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg
$1,400.00
Conquer mountains, flatten hills, and feel your bike come alive with this ultra-light, 1365 gram wheelset. Mass is the enemy of performance, and the Alpinist CL is the lightest wheelset in its class. Weight has been pared to the absolute minimum to make the make the most of every watt and deliver incredible responsiveness without sacrificing any of the strength, ride quality, or durability that are crucial to long-term performance and satisfaction.
- Assembly Method: Hand-built
- Braking Surface: Disc brake only
- Extras: Roval padded wheelbag. NoFault crash replacement policy. Lifetime warranty.
- Nipple Type: DT Swiss Pro Lock hexagonal
- Rear Hub: Roval AeroFlange Disc, Center Lock, Sealed Cartridge bearings, DT Swiss EXP internals, HG Freehub, 142x12mm thru-axle compatible
- Rim Depth: 33mm
- Rim Material: Carbon
- Rim Type: Carbon, clincher (tube-type)
- Rim Width: 21mm internal
- Spoke Count: 24
- Spoke Pattern: One-cross/Two-cross (2:1)
- Spoke Type: DT Swiss Aerolite T-head
- Weight: 686g
$1,700.00
While the CLX 32 rim is the lightest and most aero in its category, there's much more to it than that. It’s a durable, 2Bliss Ready, and wide-profiled carbon rim that’s ready to take on any adventure. Because of this, we developed the CLX 32 650b Disc wheelset. We wanted to create a lightweight wheel that works well with plus-sized tires—one that could also be used on anything from tarmac to gravel. And yes, while many opt to use mountain bike wheels for this application, there are various advantages to choosing the CLX 32 650b Disc.
First off, while most mountain wheels have hubs that are convertible to various axle standards, not many are convertible to the 12mm road thru-axle standard. Secondly, mountain wheels often come with either a SRAM XD driver, a Shimano 11-speed mountain, or 10-speed road freehub, making them incompatible with contemporary 11-speed road cassettes. And lastly, most mountain wheels use standard six-bolt disc brake hubs, rather than the Center Lock hubs found on most road applications.
With a 21mm internal width, however, the CLX 32 650b Disc features an inner width that’s consistent with many XC-oriented mountain bike wheels, so it pairs well with 650+ road and gravel tires. And with the 42-47mm tires associated with 650+, the tire and rim interaction is equally as important as the tire itself—too narrow of a rim and you’re left with an overly-rounded profile; too wide and the tread is too squared off. In either situation, you're going to get poor handling characteristics.
Each CLX 32 650b Disc set also uses the legendary CeramicSpeed bearings and comes with our padded wheelbag, quick-release, tubeless plugs, and tubeless valves.
- Rim Type: Carbon clincher, 2Bliss-Ready
- Rim Material: Carbon
- Braking Surface: Disc brake only
- Rim Depth: 32mm
- Rim Width: 20.7mm internal
- Spoke Pattern: One-cross/Two-cross (2:1)
- Spoke Count: 24
- Spoke Type: DT Swiss Aerocomp (L)/Aerolite (R) T-head
- Nipple Type: DT Swiss Pro Lock hexagonal
- Rear Hub: Roval AFD2, Centerlock, CeramicSpeed bearings, DT Swiss 240 internals, 11-speed, quick-release or 142x12mm thru-axle end cap
- Assembly Method: Hand-built
- Extras: Roval padded wheelbag, Roval steel quick-release, Roval tubeless plugs and tubeless valve,142x12mm thru-axle & quick-release end caps
- Wheelset weight: 1290g
$1,400.00
When we set out to create a lightweight wheelset, we didn't want it to be "just another climbing wheel." We wanted to provide the lightest wheelset out there with the aerodynamic attributes of something twice its depth. One wheel that'll get you to the base of a climb quickly and up it as efficiently as possible, yet still be strong enough for day-to-day abuse. It was a tall order, but in the end, the CLX 32 gave us more than what we asked for.
Our design process started with a low overall weight at the forefront, as we knew what weight we could hit with the information and technology we had available. With that weight in mind, we then turned our focus to aerodynamics and began an iterative process of designing and testing over 150 individual rims to find the optimal shape. These innumerable Computational Fluid Dynamics (CFD) models, Win Tunnel hours, and shots of espresso left us with a 32mm-deep shape that boasts more logged wind tunnel time than any other wheel in its category. Once we found the most aerodynamic shape, at the 32-millimter depth, we came back to the weight focus and proceeded to experiment with over 40 different layup methods to reach our desired weight. And this made the CLX 32 lighter and faster than every other competitor in the lightweight wheel category.
For the CLX 32 rear clincher, we mated the rim to our Aero Flange (AF) series hub with DT Swiss Aero spokes to create the best overall system. This results in a 730-gram, 21mm-wide (internal width) rear wheel with an extremely low inertia value. In cycling, inertia relates to the amount of force it takes to accelerate or decelerate, so wheels that are built with lightweight rims, like the CLX 32, result in a lower inertia value that creates a lively wheel that allows you to accelerate, decelerate, and change direction with less effort. But why so wide? Well, additional width does three primary things for a rim, it provides additional structural strength, it allows for a clean rim and tire interface when using wide tires (resulting in enhanced aerodynamics and faster rolling properties), and it better supports the tire in hard cornering. This boosts both predictable grip and confidence when things get twisty on the descents.
Each CLX 32 clincher rear wheel also employs the legendary CeramicSpeed bearings and comes with our padded wheelbag, quick-release, tubeless plugs, tubeless valve, and SwissStop Black Prince brake pads.
- Assembly Method: Hand-built
- Brake Track Height: 12mm
- Braking Surface: Carbon fiber
- Extras: Roval padded wheelbag, Roval steel quick-release, Roval tubeless plugs and tubeless valve, SwissStop Black Prince brake pads
- Nipple Type: DT Swiss Pro Lock hexagonal
- Rear Hub: Roval AF1, CeramicSpeed bearings, DT Swiss 240 internals, 11-speed
- Rim Depth: 32mm
- Rim Material: Carbon
- Rim Type: Carbon clincher, 2Bliss Ready
- Rim Width: 20.7mm internal
- Spoke Count: 24
- Spoke Pattern: Radial/Two-cross (2:1)
- Spoke Type: DT Swiss Aerolite T-head
- Weight: 730g
$1,100.00 - $1,400.00
The Roval CLX 32 Tubular wheels are some of the lightest carbon wheels ever made, but this doesn't come at the expense of fundamental performance. Instead, painstaking engineering and lab testing helped them achieve a 490-gram front and 665-gram rear wheel that's tough enough for cyclocross racing, yet light enough for the demands of a GC climber. The low inertia and ample stiffness help the wheel accelerate and change direction on a dime. We didn't skimp on aerodynamic benefits either, despite this wheel's low rim profile. The CLX 32 was engineered in CFD around a 26mm-wide tire shape, and honed in Roval's very own Win Tunnel, in order to be as aerodynamic as some rims almost twice its depth. Meanwhile, Roval aero hubs and CeramicSpeed bearings complete the fast-engaging ensemble. Truly, the CLX 32 ushers in a new era of lightweight performance road wheels.
$1,400.00
First came our CLX 64. Then the 32s. And after racking up multiple wins in Grand Tours, Worlds, and everything in between, we knew that our best bet was to take the line to new heights, or well, new depths. We needed to design one wheel that was a true quiver killer. One wheel that had all the aerodynamic benefits of the 64 in a package that climbed like the 32, and that's where the all-new CLX 50 comes in.
When we set out to create the CLX 50, we had clear goals in mind, create wheels that are 48 to 54mm deep, aerodynamically optimized, ultra-wide, and under 1400 grams. This meant that they'd have to borrow some weight savings techniques that we developed for the CLX 32, while taking some aero guidance from the CLX 64, if we were going to create what we like to call ""the unicorn wheel.""
Even though the CLX 50 is similar in weight to many wheels in the ""lightweight"" category, aerodynamics came at the forefront of the development. With this, we jumped headlong into Computational Fluid Dynamics computer modeling to arrive at various rim shapes that could make the CLX 50 as fast and light as possible. It took a while, but we narrowed the rim shape down to three contenders that were then CNC machined into rims, built into wheels, and put into the Win Tunnel. In the tunnel, we tested every wheel, ours and the competition's, with a 24C tire (measuring 26C), as tires can drastically affect testing. We chose a modern-width tire to design our rims around, because they not only allow for less tire pressure (which results in more comfort and less rolling resistance) but are also just as aerodynamically efficient when paired with the correct rim width.
After finding the optimized rim shape that supported our svelte weight requirements, we opted to lace the rims, via 21 DT Swiss Aerolite spokes, to our Aero Flange (AF) hub with the legendary CeramicSpeed bearings and DT 240 hub internals. And when it was time for final testing validation, we were left with a 50mm-deep, 770-gram clincher wheelset that's not only 200 grams lighter than the competition's similar depth wheel, but is also measurably faster in every conceivable test than each wheel in its category.
- Assembly Method: Hand-built
- Brake Track Height: 12mm
- Braking Surface: Carbon Fiber
- Extras: Roval padded wheelbag, Roval steel quick-release, Roval tubeless plugs and tubeless valve, SwissStop Black Prince brake pads
- Nipple Type: DT Swiss Pro Lock hexagonal
- Rear Hub: Roval AF1, CeramicSpeed bearings, DT Swiss 240 internals, 11-speed
- Rim Depth: 50mm
- Rim Material: Carbon
- Rim Type: Carbon clincher, 2Bliss Ready
- Rim Width: 20.7mm internal, 29.4mm external
- Spoke Count: 21
- Spoke Pattern: Radial/Two-cross (2:1)
- Spoke Type: DT Swiss Aerolite T-head
- Weight: 770g
$1,100.00
Performance Upgrade Made Easy
The C38 brings carbon fiber high performance to the real world. It's a versatile all-rounder equally at home crushing gravel washboards and summiting alpine passes. Optimized for use with modern wide tires, providing the right amount of sidewall support to facilitate surefooted handling in all conditions, the C38 wheelset is a great handling, lively climbing, robust all-road performer that also aerodynamically outperforms many deeper, aero-specific rims that cost twice as much.
Carbon wheels are a true performance upgrade to any bike, but too often the price tag puts them out of reach. The Rapide C38 shatters that barrier and brings a class-leading Roval carbon rim and DT Swiss reliability together to provide riders with the best performance carbon wheel per dollar.
$725.00
The all-new Rapide CL II wheelset brings the Rapide CLX II’s speed, efficiency, incredible handling, and stability in any conditions to more riders. Built on the exact same rims as the Rapide CLX II to elevate all this performance with tubeless-done-right technology, the Rapide CL II makes that performance easier to catch at check-out and you almost impossible to catch on the open road.
- Tire Size: 24mm - 38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm – 38mm: Tubeless (60psi) Tubed (60psi)
- Weight: Wheelset 1,590g, Front 725g, Rear 865g (including 15g, tubeless rim tape and tubeless valve)
- Assembly Method: Hand built at every step; from rim layup to the last nipple turn.
- System Weight Limit: 275lbs /125kg.
$1,025.00
The all-new Rapide CL II wheelset brings the Rapide CLX II’s speed, efficiency, incredible handling, and stability in any conditions to more riders. Built on the exact same rims as the Rapide CLX II to elevate all this performance with tubeless-done-right technology, the Rapide CL II makes that performance easier to catch at check-out and you almost impossible to catch on the open road.
- Tire Size: 24mm - 38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm – 38mm: Tubeless (60psi) Tubed (60psi).
- Weight: Rear 865g (including 15g, tubeless rim tape and tubeless valve).
- Assembly Method: Hand built at every step; from rim layup to the last nipple turn.
- System Weight Limit: 275lbs / 125kg
$1,100.00
When we set out to create a lightweight wheelset, we didn't want it to be "just another climbing wheel." We wanted to provide the lightest wheelset out there with the aerodynamic attributes of something twice its depth. One wheel that'll get you to the base of a climb quickly and up it as efficiently as possible, yet still be strong enough for day-to-day abuse. It was a tall order, but in the end, the CLX 32 gave us more than what we asked for.
Our design process started with a low overall weight at the forefront, as we knew what weight we could hit with the information and technology we had available. With that weight in mind, we then turned our focus to aerodynamics and began an iterative process of designing and testing over 150 individual rims to find the optimal shape. These innumerable Computational Fluid Dynamics (CFD) models, Win Tunnel hours, and shots of espresso left us with a 32mm-deep shape that boasts more logged wind tunnel time than any other wheel in its category. Once we found the most aerodynamic shape, at the 32-millimter depth, we came back to the weight focus and proceeded to experiment with over 40 different layup methods to reach our desired weight. And this made the CLX 32 lighter and faster than every other competitor in the lightweight wheel category.
For the CLX 32 clincher front, we mated the rim to our Aero Flange (AF) series hub with DT Swiss Aero spokes in order to create the best overall wheel system. This resulted in a 553-gram, 21mm-wide (internal width) front wheel with an extremely low inertia value. In cycling, inertia relates to the amount of force it takes to accelerate or decelerate, so wheels that are built with lightweight rims, like the CLX 32, result in a lower inertia value that creates a lively wheel that allows you to accelerate, decelerate, and change direction with less effort. But why so wide? Well, additional width does three primary things for a rim, it provides additional structural strength, it allows for a clean rim and tire interface when using wide tires (resulting in enhanced aerodynamics and faster rolling properties), and it better supports the tire in hard cornering. This boosts both predictable grip and confidence when things get twisty on the descents.
Each CLX 32 clincher front wheel also employs the legendary CeramicSpeed bearings and comes with our padded wheelbag, quick-release, tubeless plugs, tubeless valve, and SwissStop Black Prince brake pads.
- Assembly Method: Hand-built
- Brake Track Height: 12mm
- Braking Surface: Carbon fiber
- Extras: Roval padded wheelbag, Roval steel quick-release, Roval tubeless plugs and tubeless valve, SwissStop Black Prince brake pads
- Front Hub: Roval AF1, CeramicSpeed bearings
- Nipple Type: DT Swiss Pro Lock hexagonal
- Rim Depth: 32mm
- Rim Material: Carbon
- Rim Type: Carbon clincher, 2Bliss Ready
- Rim Width: 20.7mm internal
- Spoke Count: 16
- Spoke Pattern: Radial
- Spoke Type: DT Swiss Aerolite T-head
- Weight: 550g
$1,100.00 - $1,125.00
First came our CLX 64. Then the 32s. And after racking up multiple wins in Grand Tours, Worlds, and everything in between, we knew that our best bet was to take the line to new heights, or well, new depths. We needed to design one wheel that was a true quiver killer. One wheel that had all the aerodynamic benefits of the 64 in a package that climbed like the 32, and that’s where the all-new CLX 50 comes in.
When we set out to create the CLX 50 Disc, we had clear goals in mind—create wheels that are 48 to 54mm deep, aerodynamically optimized, ultra-wide, and under 1400 grams. This meant that they'd have to borrow some weight savings techniques that we developed for the CLX 32, take some aero guidance from the CLX 64, and keep all of the disc brake benefits that we've come to love if we were going to create what we like to call "the unicorn wheel."
Why discs you ask? With our disc-specific rims, we ditch the brake track, making for a stronger, more impact-resistant rim. This way, you get a disc-specific carbon layup that optimizes stiffness, a weight as close to its rim-brake brethren as possible, and incredible brake modulation and power in all conditions.
Even though the CLX 50 is similar in weight to many wheels in the "lightweight" category, aerodynamics came at the forefront of the development. With this, we jumped headlong into Computational Fluid Dynamics computer modeling to arrive at various rim shapes that could make the CLX 50 as fast and light as possible. It took a while, but we narrowed the rim shape down to three contenders that were then CNC-machined into rims, built into wheels, and put into the Win Tunnel. In the tunnel, we tested every wheel, ours and the competition's, with a 24C tire (measuring 26C), as tires can drastically affect testing. We chose a modern-width tire to design our rims around because they not only allow for less tire pressure (which results in more comfort and less rolling resistance) but are also just as aerodynamically efficient when paired with the correct rim width.
After finding the optimized rim shape that best supported our svelte weight requirements, we opted to lace the rims to our Aero Flange (AF) hub, via 21 DT Swiss Aerolite spokes, which features the legendary CeramicSpeed bearings. This way you get a complete, superior wheel system—not just a quick rim. And at the end of the day, it all amounts to a 50mm-deep, 1415-gram clincher disc wheelset that's not only ~300 grams lighter than the competition’s similar depth wheel, but is also measurably faster in every conceivable test than each wheel in its category.
$1,375.00 - $1,400.00
First came our CLX 64. Then the 32s. And after racking up multiple wins in Grand Tours, Worlds, and everything in between, we knew that our best bet was to take the line to new heights, or well, new depths. We needed to design one wheel that was a true quiver killer. One wheel that had all the aerodynamic benefits of the 64 in a package that climbed like the 32, and that's where the all-new CLX 50 comes in.
When we set out to create the CLX 50 Disc, we had clear goals in mind, create wheels that are 48 to 54mm deep, aerodynamically optimized, ultra-wide, and under 1400 grams. This meant that they'd have to borrow some weight savings techniques that we developed for the CLX 32, take some aero guidance from the CLX 64, and keep all of the disc brake benefits that we've come to love if we were going to create what we like to call "the unicorn wheel." Why discs you ask? With our disc-specific rims, we ditch the brake track making for a stronger, more impact-resistant rim. This way, you get a disc-specific carbon layup that optimizes stiffness, a weight as close to its rim-brake brethren as possible, and incredible brake modulation and power in all conditions.
Even though the CLX 50 is similar in weight to many wheels in the "lightweight" category, aerodynamics came at the forefront of the development. With this, we jumped headlong into Computational Fluid Dynamics computer modeling to arrive at various rim shapes that could make the CLX 50 as fast and light as possible. It took a while, but we narrowed the rim shape down to three contenders that were then CNC-machined into rims, built into wheels, and put into the Win Tunnel. In the tunnel, we tested every wheel, ours and the competition's, with a 24C tire (measuring 26C), as tires can drastically affect testing. We chose a modern-width tire to design our rims around, because they not only allow for less tire pressure (which results in more comfort and less rolling resistance) but are also just as aerodynamically efficient when paired with the correct rim width.
After finding the optimized rim shape that best supported our svelte weight requirements, we opted to lace the rims to our Aero Flange (AF) hub, via 24 DT Swiss Aerolite spokes, which features the legendary CeramicSpeed bearings. This way you get a complete, superior wheel system, not just a quick rim. And at the end of the day, it all amounts to a 50mm-deep, 770-gram rear wheel that's not only significantly lighter than the competition's similar depth wheel, but is also measurably faster in every conceivable test than each wheel in its category.
- Assembly Method: Hand-built
- Braking Surface: Disc brake only
- Extras: Roval padded wheelbag, Roval steel quick-release, Roval tubeless plugs and tubeless valve,142x12mm thru-axle, quick-release end caps
- Nipple Type: DT Swiss Pro Lock hexagonal
- Rear Hub: Roval AFD2, Center Lock, CeramicSpeed bearings, DT Swiss 240 internals, 11-speed, quick-release or 142x12mm thru-axle end cap
- Rim Depth: 50mm
- Rim Material: Carbon
- Rim Type: Carbon clincher, 2Bliss Ready
- Rim Width: 20.7mm internal, 29.4mm external
- Spoke Count: 24
- Spoke Pattern: One-cross/Two-cross (2:1)
- Spoke Type: DT Swiss Aerolite T-head
- Weight: 770g
$1,100.00
First came our CLX 64. Then the 32s. And after racking up multiple wins in Grand Tours, Worlds, and everything in between, we knew that our best bet was to take the line to new heights, or well, new depths. We needed to design one wheel that was a true quiver killer. One wheel that had all the aerodynamic benefits of the 64 in a package that climbed like the 32, and that's where the all-new CLX 50 comes in.
When we set out to create the CLX 50, we had clear goals in mind, create wheels that are 48 to 54mm deep, aerodynamically optimized, ultra-wide, and under 1400 grams. This meant that they'd have to borrow some weight savings techniques that we developed for the CLX 32, while taking some aero guidance from the CLX 64, if we were going to create what we like to call "the unicorn wheel."
Even though the CLX 50 is similar in weight to many wheels in the "lightweight" category, aerodynamics came at the forefront of the development. With this, we jumped headlong into Computational Fluid Dynamics computer modeling to arrive at various rim shapes that could make the CLX 50 as fast and light as possible. It took a while, but we narrowed the rim shape down to three contenders that were then CNC machined into rims, built into wheels, and put into the Win Tunnel. In the tunnel, we tested every wheel, ours and the competition's, with a 24C tire (measuring 26C), as tires can drastically affect testing. We chose a modern-width tire to design our rims around, because they not only allow for less tire pressure (which results in more comfort and less rolling resistance) but are also just as aerodynamically efficient when paired with the correct rim width.
After finding the optimized rim shape that supported our svelte weight requirements, we opted to lace the rims, via 16 DT Swiss Aerolite spokes, to our Aero Flange (AF) hub with the legendary CeramicSpeed bearings. And when it was time for final testing validation, we were left with a 50mm-deep, 1375-gram clincher wheelset that's not only 200 grams lighter than the competition's similar depth wheel, but is also measurably faster in every conceivable test than each wheel in its category.
- Assembly Method: Hand-built
- Brake Track Height: 12mm
- Braking Surface: Carbon Fiber
- Extras: Roval padded wheelbag, Roval steel quick-release, Roval tubeless plugs and tubeless valve, SwissStop Black Prince brake pads
- Front Hub: Roval AF1, CeramicSpeed bearings
- Nipple Type: DT Swiss Pro Lock hexagonal
- Rim Depth: 50mm
- Rim Material: Carbon
- Rim Type: Carbon clincher, 2Bliss Ready
- Rim Width: 20.7mm internal, 29.4mm external
- Spoke Count: 16
- Spoke Pattern: Radial
- Spoke Type: DT Swiss Aerolite T-head
- Weight: 607g
$1,100.00
We believe we've made the fastest all-around road wheels in the world. The Rapide CLX wheelset essentially combines the aerodynamic excellence of our UCI TT World Championship dominating CLX64 with the light weight and gentlemanly handling of our Polkadot-Jersey winning CLX32. The result is a wheelset that delivers maximum speed in conditions found in real-world riding; climbing performance, slippery efficiency of a dedicated aero setup, and stable, confident handling, regardless of wind conditions.
- Assembly Method: Hand-built
- Braking Surface: Disc brake only
- Extras: Roval padded wheelbag. NoFault crash replacement policy. Lifetime warranty
- Front Hub: Roval AeroFlange Disc, Center Lock, Sealed Cartridge bearings
- Nipple Type: DT Swiss Pro Lock hexagonal
- Rim Depth: 51mm
- Rim Material: Carbon
- Rim Type: Carbon, clincher (tube-type)
- Rim Width: 21mm internal, 35mm external
- Spoke Count: 18
- Spoke Pattern: Radial/Two-cross (2:1)
- Spoke Type: DT Swiss Aerolite T-head
- Weight: 649g
$1,175.00
Since 2020, Rapide CLX wheels have won more races on the world tour than any other wheels, and we just made them faster. Meet the new Rapide CLX II. Combining the aerodynamics of a deep-section TT wheel with the light weight of a shallower climbing wheel and mixing in the superior efficiency and sublime handling of a tubeless system-the Rapide CLX II delivers maximum speed for real-world riding. We developed distinctly different shapes for the Rapide CLX II front and rear rims. The result is a wheelset that catches less drag than most 65mm wheelsets and brings a dramatic 25% improvement in stability over 50mm rims in wind gusts. The Rapide CLX II utilizes a hooked rim (allowing for real-world riding pressures up to 110psi, if that's your thing) for secure tire bead retention and an easier set up and mounting experience than ever before. All in a wheel that almost doubles current industry impact standards while managing to achieve the lightest weight possible. Our aeroflange hubs are aerodynamically optimized, with wide bracing angles for increased strength and reduced spoke weight. They also benefit from the reduced weight and increased strength of ceramic sinc bearings and the legendary durability of DT Swiss exp freehub internals.
- Rim: Rapide CLX Carbon Clincher, 700c, Disc Brake, Tubeless Rim Details: 51mm Depth, 35mm External Width, 21mm Internal Width
- Hub: Roval Aero Hub (AFD01/AFD02R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub
- Bearing Type: DT Swiss SINC Ceramic Bearings
- Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 18 count, DS: 257mm, NDS: 252mm; Rear: One-cross/Two-cross (2:1) 24 count, DS: 243mm NDS: 249mm
- Nipple: DT Swiss Hex Prolock Al 2.0x14mm
- Tire Size: 24mm—38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi)
- Weight: Wheelset 1,520g, Front 710g, Rear 810g (including 15g, tubeless rim tape and tubeless valve)
- Assembly Method: Hand built at every step; from rim layup to the last nipple turn.
- Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg
$1,625.00
Since 2020, Rapide CLX wheels have won more races on the world tour than any other wheels, and we just made them faster. Meet the new Rapide CLX II. Combining the aerodynamics of a deep-section TT wheel with the light weight of a shallower climbing wheel and mixing in the superior efficiency and sublime handling of a tubeless system-the Rapide CLX II delivers maximum speed for real-world riding. We developed distinctly different shapes for the Rapide CLX II front and rear rims. The result is a wheelset that catches less drag than most 65mm wheelsets and brings a dramatic 25% improvement in stability over 50mm rims in wind gusts. The Rapide CLX II utilizes a hooked rim (allowing for real-world riding pressures up to 110psi, if that's your thing) for secure tire bead retention and an easier set up and mounting experience than ever before. All in a wheel that almost doubles current industry impact standards while managing to achieve the lightest weight possible. Our aeroflange hubs are aerodynamically optimized, with wide bracing angles for increased strength and reduced spoke weight. They also benefit from the reduced weight and increased strength of ceramic sinc bearings and the legendary durability of DT Swiss exp freehub internals.
- Rim: Rapide CLX Carbon Clincher, 700c, Disc Brake, Tubeless Rim Details: 51mm Depth, 35mm External Width, 21mm Internal Width
- Hub: Roval Aero Hub (AFD01/AFD02R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub
- Bearing Type: DT Swiss SINC Ceramic Bearings
- Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 18 count, DS: 257mm, NDS: 252mm; Rear: One-cross/Two-cross (2:1) 24 count, DS: 243mm NDS: 249mm
- Nipple: DT Swiss Hex Prolock Al 2.0x14mm
- Tire Size: 24mm—38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi)
- Weight: Wheelset 1,520g, Front 710g, Rear 810g (including 15g, tubeless rim tape and tubeless valve)
- Assembly Method: Hand built at every step; from rim layup to the last nipple turn.
- Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg
Page 1 of 2
Next page